null Skip to main content

Single Surfboard Wall Hanger In Black From Post Surf

$49.00
(2 reviews)
SKU:
PSBHBL20 BK
UPC:
073593829136
Condition:
New
Shipping:
Calculated at Checkout
Weight:
0.33
Colour:
Black
MPN:
PSBHBL20 BK
Modification Description:
Single Surfboard Wall Hanger In Black From Post Surf
Sport:
Surfing
The single surfboard wall hanger is a universal surfboard mount that can hold any size surfboard from 4' to 10' long.

Simply attach the ring to any secure hook in the garage or home to keep your surfboard conveniently and safely off the ground.

Designed to safely store your surfboard without any permanent mounts or fixtures.

Mount your surfboard to any surface safely and easily. The single surfboard hanger holds all surfboards from 4' to 10', any tail shape,  width or thickness.

Made from high strength nylon and the metal hardware is made from aluminium to ensure no rusting can occur. The base is lined to protect all tail shapes.

Please note surfboards are not included 

 

 

Need to put the board where you have no hook? Not a problem - follow these steps

HOW TO ATTACH THE HANGER TO A STUD WALL

 

1. Mark the spot on the wall where the board will be hung.
2. Aim to get your hardware in the centre of the stud. Whether you?re using a nail, hook, screw, bolt or similar, ensure that you have at least 1.5 inch (40mm) bite into the stud to ensure safe storage.
3. Grasp the hook and wiggle it to ensure it is secure.
4. Hang up your board.


ATTACH TO PLASTER BOARD WITHOUT A STUD

 

We recommend using a toggle bolt hook, you will need: A pencil, hammer drill, tape/marker (non-essential) and a toggle bolt hook of choice.

1. Mark the spot on the wall where the board will be hung. Best way is to strap the board up and test it yourself.
2. Drill the hole to match the toggle bolt you have purchased. We recommend a heavy-duty weight tolerance bolt where possible.
3. Fold the toggle back, and insert it through the wall hole until you feel the wings have opened on the other side of the wall.

4. Pull the bolt back until the wings catch the wall. They should not be twirling while you are fixing the bolt. 

5. Rotate the bolt in the wall by hand. Before steadying it completely, ensure the bracket is perpendicular to the floor. 
6. Grasp the hook and wiggle it to ensure it is secure.

7. Hang up your board.


ATTACH TO A MASONRY WALL

 

1. Mark the spot on the wall where the board will be hung. It is best to select a point on the mortar joint (if brick or block construction) where you will drill a hole and mark the spot with a pencil or marker.
2. Drilling the hole: use a tape measure or ruler to measure the thread on your hook of choice. Wrap a piece of tape or use a marker to draw on the spot that is directly above the 1-inch point. This mark will assist you in gauging the depth of the drill bit as you drill it into the wall.
3. Drill through the mark into the mortar joint. Stop drilling when you reach the depth marked on the bit. Take out the drill bit and clean out the mortar dust from the hole.
4. Use a hammer to insert a plastic anchor in front of the hole. Tap the anchor until its rim is flush with the wall surface.
5. Drive your hook into the anchor and rotate clockwise until firm and thread is well secured to the wall.
6. Grasp the hook and wiggle it to ensure it is secure.
7. Hang up your board.

2 Reviews Hide Reviews Show Reviews

  • 5
    Cool product

    Posted by Luke Willis on 28th Aug 2020

    Cool product and easy to use

  • 5
    Looks Choice Brah

    Posted by Steven Robbon on 28th Aug 2020

    Love it and love DDW